Third Trunnion Operation

Now we’ve mounted the fixture used in operation two onto the 4th axis (rotary). The part is again bolted and pinned to the fixture, and this arrangement allows us to machine the main bore and also rotate the part to 90, 180, and 270 degrees to add mounting holes, threads, etc. (Please forgive the rust visible on the 4th axis unit. It’s gone now, thanks to an Ospho(tm) phosphoric acid treatment that completely fixes the problem.)

Part mounted for 4-axis boring and drilling

I roughed the main bore using a 3/4″ diameter drill from both sides, followed by a 1-1/4″ stub drill from both sides, then an endmill using circular interpolation to get within .010″ of the final size. Finish boring was with a fancy Wohlhaupter boring head, which allowed us to bore 6″ deep and hold roundness and size with .0002″. A real pleasure to use a beautifully balanced tool like that.

Finish Machining the Bore

The next picture shows the boring tool in operation, with the usual coolant squirting everywhere. Must have cooling and lubrication. The threads were cut earlier with a thread mill using helical milling. (I made a thread plug gauge previously to check the thread size as we finished it). Boring was the last step, so we could make necessary fine size adjustments and repeat the operation as necessary.

The Mill in operation- can’t see much…

We used a boring cycle on the Fadal Mill that bores to depth, stops the spindle, shifts slightly away from the work, then retracts out of the hole. This is more accurate and leaves a better finish than the usual “G85 bore-in, bore-out” cycle. Most CNC machines have something similar.

Inspecting the bore with press fit bearings

This shows the finished bore, after the part has been anodized (Type I), and we have pressed two IGUS(tm) plastic bearings into the bore. The grooves visible in the bearings are to prevent hydraulic fluid from locking and possibly shifting the bearings.

1 thought on “Third Trunnion Operation

  1. Hi John. Congratulations on getting your site up and running. The photos are very cool, and your descriptions of the intent and processes are clear and interesting.

    Obviously this is not the first part or project you have done, so when you have spare time (haha), please consider posting about other projects with which you have been involved.

    Looking forward to seeing more of your projects.

    Best regards, -Rob.

Leave a Reply to Rob Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s